选择超声波塑焊机要适合自己的产品

The choice of ultrasonic plastic welder is a very complicated matter, and many factors should be considered at the same time. Therefore, THE PURPOSE OF THIS SECTION is to provide general guidance to help in the selection of equipment, the real choice of equipment should be in close contact with ultrasonic plastic welding experts or equipment suppliers to listen to their opinions.

After determining the working frequency of ultrasonic welding machine, the power should be considered. Each workpiece frequency can generally have several power levels. For example, the operating frequency of 20 KHZ, most equipment manufacturers provide ultrasonic plastic welders in the power range of 1 to 5Kw. In most cases, the amount of power required can be determined experimentally in the laboratories of suppliers, research institutions and universities. If the required power cannot be theoretically determined in advance, it is best to select the maximum power to ensure that the device can meet the application requirements.

Similarly, the selection of equipment must determine whether the weldment is best suited for cut-in or continuous welding. In the case of SUtured welDERS, MOST EQUIPMENT manufacturers HAVE this type of standard equipment, and they can also provide other standard rotary anvil holders in many patterns. Most anvils are cut, sealed and welded. If the weldment requires very wide continuous welds, special equipment must be designed.

Other device factors include control level, amplitude control, amplitude profile, and stored program control capability. For some applications, these options can improve weld quality and density. On the other hand, testing in the application lab can help determine which options are needed. It should also be noted that for most equipment manufacturers, it is possible to add some options to the ultrasonic welder after purchase.